LDAP: couldn't connect to LDAP server
…
00 | 01 | 02 | 03 | 04 | 05 | 06 | 07 | 08 | 09 | 0A | 0B | ||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
10 | |||||||||||||||
C0 | C1 | C2 | C3 | C4 | C5 | ||||||||||
D0 | D1 | ||||||||||||||
Eurosoft/Mylex BIOS Post Codes
код | название | описание |
---|---|---|
01 | CPU test failed | |
02 | DMA page register test failed | |
03 | Keyboard controller test failed | |
04 | BIOS ROM checksum error | |
05 | Keyboard command test failed | |
06 | CMOS RAM test failed | |
07 | RAM refresh test failed | |
08 | First-64KB memory test failed | |
09 | DMA controller test failed | |
0A | Initialize DMA controller | |
0B | Interrupt test failed | |
0C | Checking RAM size | |
0D | Initializing video system | |
0E | Video BIOS checksum failed | |
10 | Search for monochrome video adapter | |
11 | Search for color video adapter | |
12 | Word-splitter and byte-shift test failed | |
13 | Keyboard test failed | |
14 | RAM test failed | |
15 | System timer test failed | |
16 | Initialize keyboard controller output port | |
17 | Keyboard test failed | |
18 | Initialize keyboard | |
19 | Real-time clock test failed | |
1A | Math coprocessor test failed | |
1B | Reset floppy and hard drive controllers | |
1C | Initialize floppy drive | |
1D | Initialize the hard drive | |
1E | Locate adapter ROM's from C800h to DFFFh | |
1F | Locate and initialize serial and parallel ports | |
20 | Initialize time of day in RTC | |
21 | Locate adapter ROM's from E000h to EFFFh | |
22 | Search for boot device | |
23 | Boot from floppy disk | |
24 | Boot from hard disk | |
25 | Gate A20 enable/disable failure | |
26 | Parity error | |
30 | DDNIL bit-scan failure | |
FF | Fatal error…system halted |
Eurosoft 4.71 BIOS Post Codes
код | название | описание |
---|---|---|
03 | DMA page registers tested | |
04 | DMA page registers failed | |
05 | Keyboard tested | |
06 | Keyboard test failed | |
07 | Keyboard self-test passed | |
08 | Keyboard self-test failed | |
09 | 8042 keyboard controller checking links | |
0A | 8042 keyboard controller unable to read links | |
0B | RATMOD/DIAG link | |
0C | Keyboard port 60h tested | |
0D | Keyboard failed port 60h test | |
0E | Keyboard parameter tested | |
0F | Keyboard parameter test failed | |
10 | Keyboard command byte read | |
11 | Keyboard command byte failed read | |
12 | Keyboard command byte read OK | |
13 | Keyboard command byte corrupt | |
14 | RAM-refresh toggle switch | |
15 | RAM-refresh clock not correct | |
16 | RAM bit test passed | |
17 | RAM bit test failed | |
18 | RAM parity tested | |
19 | RAM parity error | |
1A | CMOS RAM tested | |
1B | CMOS RAM test failed | |
1C | CMOS battery OK | |
1D | CMOS battery failed | |
1E | CMOS checksum passed | |
1F | CMOS checksum failed | |
20 | CMOS battery fault bit set | |
21 | Master DMA controller 1 tested | |
21 | Slave DMA controller 2 tested | |
22 | Master DMA controller 1 failed | |
23 | Slave DMA controller 2 failed | |
24 | Protected mode entered successfully | |
25 | RAM test completed | |
26 | BIOS RAM checksum tested | |
27 | BIOS RAM checksum test failed | |
28 | Protected mode exit successful | |
29 | Keyboard power-up reply received | |
2A | Keyboard power-up reply missing | |
2B | Keyboard disable command tested | |
2C | Keyboard disable command failed | |
2D | Checking for video system | |
2E | POST errors have been reported | |
2F | About to halt | |
30 | Protected mode entered safely | |
31 | RAM test complete | |
32 | Master interrupt controller (PIC 1) tested | |
33 | Master interrupt controller (PIC 1) failed | |
34 | Slave interrupt controller (PIC 2) tested | |
35 | Slave interrupt controller (PIC 2) failed | |
36 | Chipset initialization | |
37 | Chipset initialization failed | |
38 | BIOS shadowing tested | |
39 | BIOS shadowing failed | |
3A | Video BIOS shadowing tested | |
3B | Video BIOS shadowing failed |
Mylex BIOS Post Codes
код | название | описание |
---|---|---|
01 | CPU test | |
02 | DMA page register tested | |
03 | Keyboard controller tested | |
04 | ROM BIOS checksum | |
05 | Send keyboard command test | |
06 | CMOS RAM test | |
08 | RAM-refresh test | |
09 | First-64K memory test | |
0A | DMA controller test | |
0B | Initialize DMA controller | |
0C | Interrupt test | |
0D | Determine RAM size | |
0E | Initialize video and verify EGA or VGA checksum | |
10 | Search for monochrome card | |
11 | Search for color card | |
12 | Word-splitter and byte-shifter test | |
13 | Keyboard tested | |
14 | RAM tested | |
15 | System timer tested | |
16 | Initialize keyboard-controller output port | |
17 | Keyboard-interrupt test |