LDAP: couldn't connect to LDAP server
…
| 00 | 03 | 0D | 0E | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12 | 16 | ||||||||||||||
| 22 | 25 | ||||||||||||||
| 30 | 33 | 37 | |||||||||||||
| 40 | 44 | 48 | 4D | 4F | |||||||||||
| 50 | 55 | 58 | 5A | ||||||||||||
| 60 | 62 | 65 | 67 | 6A | |||||||||||
| 70 | 77 | ||||||||||||||
| код | название | описание |
|---|---|---|
| 01 | Testing the CPU | |
| 03 | Initialize the 8259 interrupt controller | |
| 05 | Initialize the video board - MCA & CGA | |
| 0D | Initialize the 8237 DMA controller | |
| 0E | Initialize the DMA 74612 page registers | |
| 12 | Test the 8042 keyboard controller | |
| 16 | Test the DMA 7237 controller and 8254 programmable interrupt timer | |
| 22 | Testing DRAM refresh circuitry | |
| 25 | Base 64KB memory test | |
| 30 | Set up system stack | |
| 33 | Read-system configuration through 8042 keyboard controller | |
| 37 | Test keyboard clock and data line | |
| 40 | Determine video type | |
| 44 | Locate and test, if present, MDA and CGA video | |
| 48 | Initialize video 80 x 25 mode | |
| 4D | Display DTK BIOS copyright message | |
| 4F | Check serial and parallel ports | |
| 50 | Check floppy disk controller | |
| 55 | Check shadow RAM | |
| 58 | Display total memoryand switch to real mode | |
| 5A | Successful switch back to real mode | |
| 60 | Check hard disk drive controller | |
| 62 | Initialize floppy drive | |
| 65 | Initialize hard drive | |
| 67 | Initialize the floppy disk drive and the hard disk drive | |
| 6A | Disable gate A20 and test math coprocessor | |
| 70 | Set system date and time RTC-146918 | |
| 77 | Call interrupt 19 boot loader |